top of page

Simple Solenoid Valve 171-AA 180

The 171-AA 180 Simple Solenoid Valve is designed to allow water inlet through electrical excitation of the coil, indirectly actuating the valve. Its configuration features inlet and outlet in the same direction (180° out of phase), which simplifies certain mounting configurations.


The hydraulic circuit opens when the obturator, attracted by the magnetic field, releases an opening in the diaphragm, allowing the instantaneous passage of the fluid.

Made with high-quality materials, it guarantees strength, safety and a long lifespan.


Technical Details

  • Alternating current: 110V / 220V – 50Hz / 60Hz.

  • Class F coil (155 °C).

  • Power: 8.2 VA.

  • Input and output offset by 180°.

  • Protection against electric shock: Class I and II according to IEC 60536.

  • Insulating material: Nylon 6 – PTI = 250V.

  • Heat and fire resistance: Category A.

  • Maximum fluid temperature: 80 °C.

  • Suitable for drinking water.


Specs

  • Maximum operating pressure: 10 kg/cm² (at 90% of the indicated voltage).

  • Minimum operating pressure: 0.18 kg/cm² (at 90% of the indicated voltage).

  • Bursting pressure: 35 kg/cm².

  • Nominal flow rate at 4 kg/cm²: 30 l/min.

  • Minimum operating life: 25,000 cycles with water at 60 °C.

  • Filters located at each entrance.

  • Available supports depending on the application.

  • Inlet connection: 3/4” gas thread (14 threads/inch).

  • Outlet connection: For hoses with an internal diameter of 1/2” (12.7 mm) or 3/8” (9.53 mm).

  • Materials:
    Molded nylon body.
    Internal parts made of synthetic rubber with a brass and stainless steel core.

  • High-flow Grade 11 polypropylene encapsulated coil.

  • Standard male spade terminals.


Applications

Suitable for industrial and domestic washing machines (Marva, Refe, Girbau, Ipso, Limpi, Barcia, among others), self-service laundries and industrial laundries, provided that the specified pressure limits are not exceeded.


Certification

  • IRAM Quality Certificate No. S-2346/003-1

  • Standards IEC 60730-1 / IEC 60730-2-8


Before placing your order, please indicate:

  • Valve type

  • Current (AC or DC)

  • Voltage and frequency

  • Required flow rate

  • Operating pressure limits

  • Type of assembly required


Origin and guarantee

  • Manufactured in Argentina

  • Warranty: 30 days from the date of manufacture

Catalogo
Ancla 2
bottom of page